Computer shuts down when USB device is plugged in, how to fix it?

Fix – Computer shuts down when USB device is plugged in

Solution 1 – Check your power supply According to users, sometimes this problem can occur due to your power supply. Users reported that the issue was a failing power supply and after replacing it the problem was resolved. Keep in mind that replacing the power supply is an advanced procedure, so if your PC is under warranty, be sure to take it to the official repair center an ask them to replace your power supply. If you’re tech-savvy, you can replace the power supply on your own, but keep in mind that changing the power supply will violate your warranty. Replacing the power supply can also cause damage to your PC if you’re not careful or if you don’t know how to do it properly. To avoid any damage to your PC, it might be best to contact a professional. Solution 2 – Check your cable If you’re using a cable to connect your USB device with your PC, you might want to check your cable. Sometimes your cable might be damaged and that can cause your PC to turn off. To fix this problem, you need to replace your USB cable with a new one and check if that solves the issue. Solution 3 – Reinstall your USB drivers In some cases this problem can be caused by problematic drivers on your PC. To fix the issue, you need to reinstall your USB drivers. This is rather simple and you can do it by following these steps: After removing all USB drivers, you need to restart your PC. Once your PC restarts, Windows 10 will automatically install the missing drivers. After your drivers are reinstalled, check if the problem appears again. Solution 4 – Try your device on a different PC If this problem appears with devices that require high power such as portable hard drives, it’s possible that your PC isn’t providing enough power. To fix the problem, you can try connecting your device to a different PC that has similar hardware. If the problem doesn’t appear on the other PC, it’s most likely that your device isn’t getting enough power or that your power supply is failing. Solution 5 – Try using a USB troubleshooter SPONSORED In some cases, this can be a software issue and you might be able to fix it by running a troubleshooter. The troubleshooter can fix common software problems with the USB, so you might want to try it out. To run the troubleshooter on Windows 10, do the following: You can also run the troubleshooter by using Control Panel. To do that, follow these steps: Solution 6 – Disable the USB ports This is a simple workaround, and if you can’t use your PC due to this error this solution might help you. To disable your USB ports, do the following: Once you disable all your USB ports, the problem will disappear and you’ll be able to use your PC without any problems. This is just a crude workaround, so keep in mind that you still need to find a cause for this problem. Solution 7 – Check the USB connectors In some cases, this problem can appear due to issues with your USB connectors. Sometimes your USB connectors can become loose and that can cause this problem to appear. In addition, the problem can also appear if metallic contacts are touching. This can be a big problem, and you might need to contact a professional in order to fix it. Several users reported that this problem can occur with front ports on your PC, especially if they aren’t fully connected. After connecting the front ports properly, the issue was resolved. Keep in mind that this solution requires you to open your computer case for hardware inspection, and by doing that you’ll violate your warranty. Solution 8 – Scan your PC for malware Although unlikely, malware infections can sometimes cause your PC to turn off when connecting a USB device. To fix the malware problem you need to perform a detailed system scan. Keep in mind that some viruses are harder to detect than others, so you might want to try scanning your PC with two or more antivirus tools. As previously mentioned, malware infection is an unlikely cause for this problem, but few users claim they fixed the issue after removing the malware from their PC. There are many reasons why your PC restarts after plugging a USB device. In most cases the problem is your power supply or USB connectors, so you should definitely perform a hardware inspection and replace the faulty components.

SPONSORED Name * Email * Commenting as . Not you? Save information for future comments
Comment

Δ