The DHCP server is temporarily unavailable The computer is not connected properly to the network The computer is not authorized to connect to the network The computer itself was unable to communicate with a DHCP server Your router is wedged or jammed, and thus needs a reboot WiFi or Internet connection isn’t working

The 169 IP range is reserved by Microsoft for private network addressing. With that in mind, if your computer is configured to obtain an IP automatically, you may get one of those (169). If this happens, the APIPA (automatic private IP addressing) checks to configure itself automatically with an IP address and a default class B subnet mask. If you tried to reboot your computer/router and still find your PC stuck with a 169 IP address, we have a few solutions you could try.

What can I do if the Computer is stuck with a 169 IP address?

Conclusion

To wrap things up, if you discover that your PC is stuck with a 169 IP address, there are many ways you can fix this issue. Whether by updating the OS, upgrading to a major OS release, migrating to a new system, or performing a system restore, these can all affect your PC. With that in mind, check for any recent changes on your system and try to roll them back one-by-one. If you see no improvement, you can move to our other suggestions. This only happens if the network detects a proper hardware connection but can’t communicate with the DHCP server to get an IP address. In this situation, more often than not, the culprit is the system’s firewall. Therefore, it makes sense that resetting your firewall preferences and rebooting your system could fix this issue. 2. Select Device Manager 3. Find Network Adapters 4. Expand the list 5. Right-click the LAN Ethernet adapter 6. Select Properties 7. Go to the Driver tab 8. Click the Uninstall button 9. Restart your computer 2. Select Run 3. Type compmgmt.msc and press Enter 4. Select Device Manager 5. Expand the Network Adapters list 6. Right-click the troublesome Ethernet or Wireless Adapter driver (it may have an exclamation mark or error mark next to it) 7. Click the Uninstall button 8. Right click the Network Adapters category 9. Select Scan for Hardware Changes 10. Right-click the Start menu 11. Select Run 12. Type ncpa.cpl and click OK 13. Right-click your computer’s Network Adapter 14. Click the Properties button 15. Uncheck the Internet Protocol Version 6 (TCP/IPv6) box then click OK 16. Right click Start 17. Select Command Prompt (Admin) 18. In the command prompt window type the following commands, followed by Enter (for each of them):

netsh winsock reset catalog netsh int ip reset reset.log ipconfig /release ipconfig /renew

  1. Restart your computer and try to connect again Thus, a VPN can not only keep you away from traffic monitors, spies, and hackers, but it can also prevent this type of error from occurring. SPONSORED The best VPNs for Windows 10 have a large number of servers across the globe, allowing you a seamless connection at all times.
  2. Select Control Panel
  3. Go to the Power Options category
  4. Select the Choose what the power buttons do option
  5. Click the Change settings that are currently unavailable button
  6. Scroll down to Shutdown settings
  7. Uncheck the Turn on fast startup option
  8. Click Save changes
  9. Select Run
  10. Type services.msc and press enter
  11. Go to the Services section
  12. Select DNS client
  13. Right click and select Restart
  14. Click Start
  15. Go to the search field box and type CMD
  16. Right-click Command Prompt
  17. Select Run as Administrator
  18. Type sfc/scannow
  19. Press Enter
  20. Restart your computer and try to connect again
  21. Select Control Panel
  22. Go to the Network and Internet category
  23. Click the Network and Sharing center button
  24. Select the Manage Network Connections option
  25. Right-click your Local Area Network and select Properties (make sure that the device listed refers to a Realtek RTL Ethernet card)
  26. Go to the Networking tab
  27. Uncheck the Internet Protocol Version 6 (IPv6) option
  28. Highlight (click) the Internet Protocol Version4 (IPv4) option
  29. Click Properties
  30. Go to the General tab
  31. Select Use the following IP address and type the following:

IP Address: 192.168.0.1 Subnet mask: 255.255.255.0 Default Gateway: nothing (leave it blank)

  1. Under the Alternate Configuration tab, set to Automatic private IP address
  2. Click OK for both windows to save and exit Rerun the automatic configuration for your network connection. If it does not complete successfully, set up the network information to:

IP Address: 168.0.2 Subnet mask: 255.255.0 Default Gateway: 168.0.1

Save and then test your connection once again. We recommend you to try our methods one by one and avoid skipping any of them; the one you skip may be the very one that would’ve solved your issue. Has any of our suggested fixes worked for you? Tell us how you managed to solve the problem in the comments section below.

Name * Email * Commenting as . Not you? Save information for future comments
Comment

Δ